| |
IPM Alumni
- CAI, WEIWEN
- M.S., Materials Science and Engineeering, 1993
Thesis: "Phase transformations and age hardening of a rapidly solidified Ti- 24Al-11Nb alloy"
- CANTONWINE, PAUL E.
- Ph.D., Materials Science and Engineeering, 1999
Dissertation: "Processing and properties of an alumina composite fiber"
- M.S., Materials Science and Engineeering, 1993
Thesis: "The effect of processing on the interface structure/property relationship in a Ti 24A1 11Nb (at%) composite"
- CHOI, BYOUNG-WOO WILLIAM (Bill)
- CROW, PHILIP D.
- Ph.D., Materials Science and Engineeering, 1994
Dissertation: "Power-law creep consolidation of metal matrix composites"
- DAVISON, TERRY S.
- Ph.D., Materials Science and Engineeering, 1993
Dissertation: "Elastic/plastic analysis of the contact deformation of metal-coated fibers"
- ENGLE, TAMMY
- B.S., Aerospace Engineering, 1993
Thesis: "The Effects of Processing on Interface Strength in an SCS-6/Ti 24Al 11Nb Composite"
- GAMPALA, RAVIKUMAR S.
- Ph.D., Materials Science and Engineeering, 1994
Dissertation: "The inelastic blunting of hemispherical contacts"
- GOLDMAN, JEFFREY A.
- M.S., Materials Science and Engineeering, 1991
Thesis: "Laser ultrasound density distribution sensing"
- GOODGE, ADAM C.
- M.S., Engineering Physics, 1997
Thesis: "Lens focused microwave reflectometry concepts for ceramic coating characterization"
- GROVES,
JAMES G.
- Ph.D., Materials Science and Engineeering, 1998
Dissertation: "Directed Vapor Deposition"
- M.S.,Materials Science and Engineeering, 1992
Thesis: "Fiber Damage During the Consolidation of Metal Matrix Composites"
- HASS, DEREK D.
- HILL, DAVID L.
- M.S., ,Materials Science and Engineeering, 1994
Thesis: "Jet vapor deposition coating of fibers"
- HOUGH, HEATHER J.
- M.S., Materials Science and Engineeering, 1993
Thesis: "Luminescence sensing of stress in metal matrix composites "
- KUNZE, JOSEPH M.
- KUNTZ, TODD A.
- M.S., Materials Science and Engineeering, 1991
Thesis: "Measurement of internal residual strain gradients in metal matrix composites using synchrotron radiation"
- LANKEY, REBECCA L.
- M.S., Materials Science and Engineeering, 1995
Thesis: "Jet vapor deposited nanocomposites : processing and properties"
- LEE, Phillip P.
- B.S., Aerospace Engineering, 1993
Thesis: "Consolidation Behavior of Sapphire Fiber-ReinforcedAluminum Matrix Composite Monotape"
- LIU, YONGMEI
- MACIEJEWSKI, JOSEPH O.
- M.S., Materials Science and Engineeering, 1998
Thesis: "Three dimensional atomistic simulation of metal vapor deposition"
- MARCIANO, YOSSI
- MAURICE, DAVID R.
- Ph.D., Materials Science and Engineeering, 1992
Dissertation: "Local modeling of mechanical alloying"
- M.S., Materials Science and Engineeering 1988
Thesis: "The physics of mechanical alloying: a first report"
- MUNGER, GARETH T.
- MURDICK, DEWEY A.
- Ph.D., Materials Science and Engineeering, 2006
Dissertation: "Simulating the Atomic Assembly of Gallium Arsenide"
- NEWSOM, KEVIN
- B.S., Aerospace Engineering, 1993
Thesis: "A Comparison Study of the Fiber Fracture Sensitivity of Metal Matrix Composites Duringt he Consolidation Process"
- QUAN, JUNJIE
- Ph.D, Materials Science and Engineeering, 2006
Dissertation: "TBA"
- QUEHEILLALT, DOUGLAS T.
- PRABHAKAR, GIRIDHAR
- M.S., Materials Science and Engineeering, 1998
Thesis: " Laser ultrasonic tomographic characterization of materials with density gradients"
- QIAN, ZILI
- M.S., Applied Math, 1994
Thesis: "Dilation rates for isolated cusped pores in power-law creeping materials"
- RITENOUR, ANDREW P.
- B.S., Electrical Engineering, 1997
Thesis: "Directed Vapor Deposition of Silicon Films For Applications in Large-Area Electronics"
- RUSSELL, DANA T.
- M.S., Materials Science and Engineeering, 1996
Thesis: " Creep of titanium matrix composite : models and mechanisms"
- RYDIN, RICHARD W.
- M.S., Materials Science and Engineeering, 1992
Thesis: "Mechanically alloyed intermetallic Ti*A1Nb microstructures and properties"
- SCHULITZ, FREDERICK T.
- M.S., Materials Science and Engineeering, 1995
Thesis: " Ultrasonic propagation in viscous liquid suspensions "
- SYPECK, DAVID J.
- TOBEY, DANA
- B.S., Aerospace Engineering, 1993
Thesis: "Luminescence to Sense Stress in Ruby Fiber Composites"
- TURNER, CAROL L.
- B.S., Chemical Engineering, 1995
Thesis: "Slurry Optimization of Titanium Matrix Composites via Tape Casting Process"
- VANCHEESWARAN, RAVI
- WARREN, JOHN M.
- Ph.D., Materials Science and Engineeering, 1994
Dissertation: " Fiber damage prediction for the consolidation of Ti-6Al-4V (PVD) metallized alumina fibers"
- WATSON, THOMAS J.
- Ph.D., Materials Science and Engineeering, 1992
Dissertation: "Yield surface models for consolidation of metallic powders by time-independent deformation"
- WILLIAMSON, Mark. J.
- M.S., Materials Science and Engineeering, 1998
Thesis: "Contributions to Residual Stresses in Metal Matrix Composites"
- YANG, YOUGEN
- YUNGWIRTH, CHRISTIAN J.
- M.S., Materials Science and Engineeering, 2006
Thesis: "Ballistic Response of Pyramidal Lattice Truss Structures"
- ZHOU, XIAOWANG
- ZOU, WEI (David)
|
|
